Esab 2200I AC/DC/HF Complete Plant TIG

Description

Designed for high-quality TIG-welding, in both DC and AC mode, this TIG welding machine will give an excellent arc strike and consistent, stable arc. All types of material and thickness up to 5 mm can be welded with the highest quality.

One of the most important tasks of an AC TIG machine is to provide a stable arc. The ESAB Caddy TIG 2200i has the QWave? function which optimises the AC waveform to give a smooth arc and at the same time the lowest possible noise without compromising the welding result. This machine also has True AC rating where the set current is always equal to the true current.

Features:
Durable and impact resistant design with OKC 50 cable connectors
Easy to operate
Digital display for settings
Plate thickness setting for TIG (TA33 AC/DC). Set the plate thickness and the machine will control the welding parameters.
Adjustable slope down and gas post-flow (TA33 AC/DC).
DC Pulsed TIG (TA34 AC/DC) giving increased control of heat input and weld pool
Two memories (TA34 AC/DC) for storing of settings
Micro Pulse (TA34 AC/DC) minimising heat affected zone especially on thin material
Adjustable slope up/down and gas post-flow (TA34 AC/DC)
Remote control possibility
ArcPlus II regulator for better MMA welding characteristics. Higher weld quality with less after treatment
Alll types of material, including aluminium, and thickness up to 5 mm
Can operate with extra mains cables, over 100 m, thanks to the built-in PFC circuit
IP 23 – designed for outdoor use making it safe on all work sites.