Welding Filter (Pair)

Description

Highlights:
Made from 3M high performance filter media for effective filtration efficiency
Lightweight and provides low breathing resistance
Suitable for use with 3M? 6000/7500 Series Half Face Respirators and 3M? 6000/7000 Series Full Face Respirators
Suitable for use with 3M? Half Face Respirators 6000 / 6500QL / 7500 Series and 3M? Full Face Respirators 6000 Series

Provides protection against: Particulates (P2), Ozone and Nuisance Level* Acid Gas and Organic Vapours with Low Vapour Pressure.

Protection Factors
Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels.

This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
– With a 3M 6000/7500 Series Half Face Respirator: for particles, for airborne concentrations up to 10 times the Workplace Exposure Standard (WES)
– With a 3M 6000/7800 Series Full Face Respirator: for particles, for airborne concentrations up to 50 x WES
– Organic compounds with low vapour pressures (<1.3Pa @ 25 degrees Celsius) in concentrations up to 10 x WES
– Ozone up to 10 x WES
– Offers relief from acid gases and organic vapours at levels below the WES

Common Applications/Hazards:

*Nuisance Levels are those levels below the Workplace Exposure Standard (WES).

Suggested applications
Common Applications/Hazards: For protection against welding fume, ozone, polishing and grinding particles. Also for spraying pesticides or herbicides with vapour pressure <1.3 Pa @ 25?C